War.MMOUI - Latest Interfaces

Reported (1.0.1a)

Thrae — Fri, 02 Jan 2009 06:38:49 +0000

Reported!
Helping make this game a better place, one banning at a time.

New in 1.01a: Repackaged Zip correctly.

New in 1.0.1
- Crucial hotfix. The addon now works properly.

New in 1.0
- Initial release.
- A "Report!" button has been added to the top of the mail window for gold sellers/spammers.

RenownTactics (2.0a)

Thrae — Fri, 02 Jan 2009 06:37:12 +0000

Want to squeeze every last bit out of your Renown gain? RenownTactics helps you fully utilize the Renown Increasing RvR (Red) Tactics bought from the Renown Trainer by automatically switching tactics based on what area you're in: Scenario, Objective, Skirmish (anywhere else while RvR flagged), City Seiege, and non-RvR. This corresponds to all five tactic sets available, and will use 1,2,3,4,5 in that order. To change this order, read the included Readme file. These settings are saved across sessions.

This is an automatic, passive addon. If you are in combat, it will wait until you are out of combat to automatically switch.

Please note at current, the tactics designed to be used with this addon only increase the Renown gained from player deaths, not all Renown gained in an area. This will probably change sometime in the future, and anyway, what are you going to use that 2nd RvR Tactic Slot for?

This addon should work with all locales, except for this description of what it does and how to use it which is currently only in English.

New in 2.0a: Repackaged Zip correctly.

New in 2.0:
As of RenownTactics 2.0, your settings are now saved across sessions.

RenownTactics uses no slash commands, so the generic /script must be used. Here are the functions you can call:

-- Disable the addon (soft disable).
/script RenownTactics.Disable()

-- Re-enable the addon (after use of above)
/script RenownTactics.Enable()

-- Change current tactics set to given tactics set number.
-- This will wait until you can safely change tactics sets.
-- Useful in macros.
/script RenownTactics.ChangeTactics(number)

-- Swap one tactics set with another. EXPERIMENTAL.
/script RenownTactics.SwapTacticsSets(number, number)

--]

-- Tactic set to switch to in scenarios. Default = 1
/script RenownTactics.SetScenario(number)

-- Tactic set to switch to in Battlefield Objectives (BOs and Keeps). Default = 2
/script RenownTactics.SetObjective(number)

-- Tactic set to switch to if you are RvR flagged in the Lakes or PermaFlagged. Default = 3
/script RenownTactics.SetSkirmish(number)

-- Tactic set to switch to if you are in a City Seige. Default = 4
/script RenownTactics.SetSeige(number)

-- Tactic set to switch to if nothing else applies. Default = 5
/script RenownTactics.SetDefault(number)

-- Tactic set to switch to if you're in a BO, but you're not grouped. Default = nil (disabled)
/script RenownTactics.SetSoloObjective(number)

-- Tactic set to switch to if you're in a RvR Zone, but you're not grouped. Default = nil (disabled)
/script RenownTactics.SetSoloSkirmish(number)

-- Tactic set to switch to only if you're solo and nothing else applies. Default = nil (disabled)
/script RenownTactics.SetSoloDefault(number)

New in 1.1: Added the ability to switch between different tactic sets if you join a group or are already in a group vs if you are solo (not in a group). Warband counts as grouped. Scenario does not.

ThreeBars (Discontinued)

ChaosInc — Mon, 15 Dec 2008 22:31:33 +0000

Sorry, but this mod is no longer maintained here, as it seems the site is pretty much dead. You can find updates here.

What a shame, I really liked this place....

Scenario Statistics (v1.4)

Jarika — Tue, 02 Dec 2008 15:16:16 +0000

A simple addon, that allows you to review your win/loss ratio in scenarios as well as quite a few other statistics, as the highest damage you've done, or the most killing blows, or how much XP you get on average in a scenario.

There is only one single slash command:
/sstats

Without LibSlash installed use this (exactly like this):
/script ScenarioStats.Slash("")

This will show the GUI window. Rightclick it for configuration.

It should work with all languages, but if it should cause problems with something, let me know the name of the scenario that doesn't work and what language your client/server is.

It now saves the data on a per-character base. That means your Swordmaster on one server, your Rune Priest on the same server and your Sorceress on another will have different statistics each.
You can easily view the data of other characters, to compare how you're doing.

Changing the whole Warhammer to safe settings per character is no longer required to get no mixed up statistics. Actually it is not even recommended anymore, if you want to view other character's statistics.

Optionally requires LibSlash by Aiiane. It will work fine without it, but you won't be able to use the /sstats shortcut (see above)

Horizontal Mechanic Bar (v0.4)

Jarika — Wed, 19 Nov 2008 14:58:13 +0000

==About Horizontal Mechanic Bar==
Shows the career resources (Dark Magic, Bloodlust, etc) in a moveable, resizable horizontal bar.

==How to move/resize==
Move and resize with the layout-editor. (to change height, use the corner, then adjust the width)

==Comand Line Parameters==
Following options are available:
/HMB FG red green blue - Sets the foreground color of the bar
/HMB BG red green blue - Sets the background color of the bar
/HMB TH - sets the thresholds (see below)
/HMB THC index red green blue - Sets threshold colors for index
/HMB reset - resets everything

==Thresholds==
HMB supports coloring the bar differently depending on how high the mechanic value is.
On Sorceresses and Bright Wizards they're set to 11, 31, 71, 91

Between 0 and 10 the bar will be colored in the color of Threshold index 1 (can be set with /HMB THC), by default that is green
Between 11 and 30 its index 2. By default thats yellow
etc

For Swordmasters and Black Orcs the Thresholds are 1 and 2.
That means for Mechanic value 0 (Normal Balance/No Plan) it's index 1, for 1 (Improved Balance/Da gud Plan) its the color of index 2, and for mechanic value 2 (Perfect Balance/Da Best Plan).

You can add your own thresholds if you like or change these one.
Entering /HMB TH without any values will clear any set thresholds and use the foreword color for each of them.

Dark Magic/Combustion Countdown (v0.3)

Jarika — Wed, 19 Nov 2008 14:56:53 +0000

About Dark Magic/Combustion Countdown

Dark Magic/Combustion Countdown (or DMCD) displays a small, resizable bar, that counts down the time till the Dark Magic or Combustion count for Sorcerers and Bright Wizards starts to decay. Never again you'll start a long cast and just that moment your DM/Comb starts to drop!

How to move/resize

In standalone mode you can move and resize it with the Layout Editor

Configuration

Following options are available:
/DMCD FG red green blue - Sets the foreground color of the bar
/DMCD BG red green blue - Sets the background color of the bar
/DMCD WARN - Sets the warning time
/DMCD WARNCOLOR red green blue - Sets the color for the warning-time
/DMCD HMB - toggles stickyness to HMB and standalone mode (see below)
/DMCD reset - Resets everything

The last few seconds

The last few seconds (default 3.5) will be displayed in a different color to remind you to refresh your DM/Combustion. This can be configurated with the WARN and WARNCOLOR options

What is HMB?

HMB stands for Horizontal Mechanic Bar and is another addon written by me. It displays the DM/Combustion (and most other Career Resources) in a nice resizeable bar.
DMCD will look for that addon and if it is found, will automatically attach itself to it by default. It will then be moved and resized when you resize HMB

You can toggle this behaviour with the HMB switch, and position DMCD yourself.

Is HMB required

No, HMB is not required, if it is not installed, then DMCD will automatically work in standalone mode and you can move it around with the Layout Editor.

Where can I get HMB?
Right here

Other required AddOns

LibSlash by Aiiane is an optional requirement. The Addon will work fine without it, but to use the slash commands you need to install LibSlash

JunkDump (1.0.3)

Daegalus — Thu, 13 Nov 2008 04:27:37 +0000

Summary
JunkDump is a quick way of selling your junk whenever you are in town. After a quick configuration, a simple click will clear your bag of any unneeded items and give you that precious bag space back. JunkDump uses profiles to seperate settings between characters.

Usage
Basic Important Info
Bag Mode: This will designate a bag (or bags in the future) that will be sold entirely. It will turn off the normal selling mode and will only sell stuff in that bag. Be careful though, it will sell all items in it with no questions asked. If it can be sold, it will be sold. So be careful when turning this on. Bag mode IGNORES the Exceptions List.

Additions List: Anything placed on this list will be sold in addition to normal settings. This is if you have a lower rarity or some item that normal settings don't cover, but you want to sell anyway.(Additions only work in Default mode) Exceptions List: Anything placed on this list, will not be sold in default mode. It is set for items that you want to keep, but normal settings mark it for sale.

Non-Command Settings
Firstly, to bring up the options menu, aside from the slash command, you may right-click the "Sell Junk" button when youa are at a vendor to pull up all the settings or for use of Test Mode.
As of 1.0, Additions/Exceptions list are primarily set through clicking on items in yoru bag with modifier keys.
Ctrl+Shift+Left Click will add an item to the Exceptions list if it is not already there. If it is, it will remove it from the list.
Ctrl+Alt+Left Click has the same behavior as the above click, except it is for the Additions list.
Options Window Settings
Bag Mode, will enable or disable bag mode. Bag mode sells EVERYTHING in the specified bag using the Bag Mode Bag setting to the right of it. When I mean Everything, I mean everything. Anything that can be sold, will be sold. No checks or blocks are in place. So please use this wisely. You have been warned.
Gold & Item reports are just that. Gold report toggles the message of how much gold you earned when you close the vendor window, if you used JunkDump to sell anything. Items report, off by default, will post a list of items sold in chat. Future plans might make a window for it later on with a better report.
Rarity sets the threshold of what to sell. Anything that is that rarity or lower, will be sold if it passes all other checks based on your settings.
Profession Settings
For each profession, you can set if you want to sell items from it or not. If set to NO, it will never sell an item that is designated for that profession. If set to YES it will sell them.
Ignoring Rarity of a Profession is for all professions set to YES to sell. This will ignore your normal Rarity threshhold and sell all profession items of any rarity.
Slash Commands
These are all commands that can be used with /jd or /junkdump to allow certain changes to be made without an options window or something that can be done better without an options window. Anything in bold, is the default option if one is not specified

/jd exceptions
Ex. /jd exceptions list
Ex. /jd exceptions del 1
This will list the items from your exceptions list, if any, in a numbered list. To delete an item from the list, incase you no longer have the item to CTRL+SHIFT click it, use the del command along with the item number from the list.

/jd additions
Ex. /jd additions list
Ex. /jd additions del 3
Works the same way as the exeptions list one, except for the additions list.
/jd profiles

Ex. /jd profiles list
Ex. /jd profiles reset
Ex. /jd profiles copy Daegallus Red Eye Mountain
Ex. /jd profiles del Daegallus Red Eye Mountain
These options allow you to manage your profiles. List will list all the profiles currently saved for your characters. Reset, will reset your current characters settings to default. Copy allows you to copy settings from another character. Finally, del deletes the profile of specified player. Be careful though when deleting for a character that you are on. Always do a Reset right after to get settings, otherwise all of JunkDump will break since it doesnt have any settings.

/jd options
Will open the options GUI.

Other Info
TO DO for 1.1
Whatever needs to be fixed, or feature requests
Add rarities per profession.
Add skill range for professions (like all Cultivation under 20 cultivation)
Create Localization file for translation.
TO DO for 1.2
Localize JunkDump
Multi-bag mode.
Feature-Requests/Bug Fixes

This addon now is compatible with BackpackLock and will not sell anything that gets locked. ATTENTION: THIS ADDON USES LIBSLASH. PLEASE MAKE SURE YOU HAVE IT INSTALLED.

AutoDeath (1.0.4.05)

Mera — Tue, 11 Nov 2008 20:00:49 +0000

Description
An addon to:

automatically release your body when you are dead
automatically resurrect when you receive one
fix the cooldown timer not hiding properly after being resurrected

Usage
By default AutoDeath is disabled, to enable it bring on the GUI with /autodeath and check the ON/OFF option.

http://s.war.mmoui.com/preview/pvw34.jpg

Tags: autodeath autodead autorelease auto automatically release body corp dead death resurrect resurrection

DefaultTabs (Discontinued)

ChaosInc — Sun, 09 Nov 2008 17:05:24 +0000

Sorry, but this mod is no longer maintained here, as it seems the site is pretty much dead. You can find updates here.

What a shame, I really liked this place....

Reborn Frame Modifier (Discontinued)

ChaosInc — Fri, 07 Nov 2008 14:26:59 +0000

Sorry, but this mod is no longer maintained here, as it seems the site is pretty much dead. You can find updates here.

What a shame, I really liked this place....

Chat Fade off (v0.1)

Jarika — Sat, 01 Nov 2008 17:45:25 +0000

Once installed it automatically turns "Fade Text" in the User settings to false.

Due to a bug in the original files that setting is not saved, this addon should fix this, till there's an official fix from Mythic.

It seems to work for me so far, please report any bugs you encounter

LibSlash (2.3-release)

Aiiane — Fri, 31 Oct 2008 19:29:49 +0000

A basic library for registering slash commands in the WAR interface.

If you're downloading this because an addon you want to use requires it, just extract it into the interface\addons directory, and that's all you need to do. It'll also give you access to /addon and /uimod automatically.

--------------

If you're writing an addon and want to utilize LibSlash, place it in the proper addons directory along with your other addons. Then, add it as a dependency in your addon's .mod file, like so:

This will ensure that LibSlash is loaded before your addon, so that its functions will be available for use.

To register a slash command handler, call LibSlash.RegisterSlashCmd() with the slash command you want to register (a string, NOT INCLUDING THE /) and a function to serve as the handler:

LibSlash.RegisterSlashCmd("myslash", function(input) MyAddonHandleSlash(input) end)

The single argument passed to the handler is the rest of the chat line entered after the initial slash command, so the above code would call MyAddonHandleSlash with an argument of "testing" if I typed "/myslash testing" at the command line. By default, the argument passed is automatically converted to a string; if you desire the original wstring instead, use RegisterWSlashCommand().

To unregister a slash command, use LibSlash.UnregisterSlashCmd("myslash") - the only argument it takes is a string specifying the slash command to unregister. You can also use LibSlash.IsSlashCmdRegistered("myslash") to see if a slash command is already registered, possibly by another addon.

Both the register and unregister functions will return true on success, or false on failure for any reason such as attempting to register a slash command which is already registered, or other silly things.

Warhammer Scrolling Combat Text (1.21)

Grayhoof — Sun, 26 Oct 2008 03:50:36 +0000

What is it? - The official port of SCT from WoW to WAR

What can it do?

- Damage for incoming and outgoing with filtering for small damage.
- Heals for incoming and outgoing with filtering for small heals.
- All "Miss" events (dodge, block, immune, etc...)
- Custom Colors for all text events
- Low Health with values, and optional sounds
- Enter and Leave Combat Messages
- Renown, Experience, Influence Gain
- Eight Animation Types (Vertical, Rainbow, Horizontal, Angled Down, Angled Up, Sprinkler, Curved HUD, Angled HUD)
- Five Fonts
- Three seperate Animation frames, each with their own settings. Assign any Event to each.
- Ability to flag any event as critical or as a text messages
- Options for text size, opacity, animation speed, movement speed, and on screen placement
- 5 built in profiles for easy experimentation.

How do I use it? - First unzip it into your interface\addons directory. For more info on installing, please read install.txt. Now just run WAR and once logged in, type /wsct to get the options list.

Please see the readme.text for all the information about configuring WSCT.

zStats (v0.1)

Zypher — Fri, 24 Oct 2008 08:31:09 +0000

Creates a window(movable via the layout editor) that displays:

Clock | FPS | LATENCY | KD/Ratio

Latency is dependant on you casting a spell so until then It wont update.

Rolodex (1.4.3)

Wobin — Sat, 11 Oct 2008 15:37:53 +0000

Offers a list of names from your guild/friendslist/alternate characters to insert into the "To" window

In the To field, hit 'Tab' to get a full listing of available names, or type in the first letter or so then 'Tab' to get a filtered list. Click on the name to make it the recipient of the mail.

(PS, will not work perfectly with zMailMod, as the Rolodex will remain onscreen after you close the mail window. Simply hit the 'X' to close it, until zMailMod fixes itself up =P)

Addon developers. If you want to use this list to propagate your email mods, use the following:

Rolodex.RegisterEditBox( WindowName, EditBoxObject, EditBoxName)

WindowName - The name of the frame your editbox is in
EditBoxObject - The object of your edit box
EditBoxName - The name of the EditBox (basically the objectname with quotation marks)

to register your editbox to adjust Rolodex. Note, as we -don't- yet have Optional Dependancies, you can either make Rolodex a dependancy, or time the registration at a point where you will guess that Rolodex will have been loaded. Maybe on opening of the mailwindow, or a few seconds after load or something.

StickyChannel (1.1.1)

Karrion — Sat, 11 Oct 2008 05:04:54 +0000

StickyChannel: Remember custom channels through logout

To join a channel which should be automatically joined when you next
login on this character:
/schan join

To join a channel which should be automatically joined when you next
login on any character on this server:
/schan joins

To join a channel which should be automatically joined when you next
login on any character on any server:
/schan joing

To leave and forget a channel previously joined with /schan join:
/schan leave

To leave and forget a channel previously joined with /schan joins:
/schan leaves

To leave and forget a channel previously joined with /schan joing:
/schan leaveg

/schan is a shortcut for /schan join

MoveableActionBarLockToggler (1.1)

Rakshasas — Tue, 07 Oct 2008 03:32:02 +0000

Simple Addon that makes the ActionBarLockToggler moveable. It simply registers the window with the LayoutEditor.

SendStuff (1.15)

Kanedacorp — Sun, 05 Oct 2008 06:46:48 +0000

Mail Automation tool
The mod is configurable with options for which character to send Apothecary, Cultivation, Talisman making and Salvaging mats to. What skill range of each profession to send, minimum stack size, max rarity to send and min rarity for loot.
Once the options are set to your liking, just open the mail window and your backpack, hit the button and go afk for a few mins.

MailCooldown (1.3)

Wobin — Fri, 03 Oct 2008 05:44:08 +0000

Currently WAR prevents you from sending more than one mail in a 5 second period. This is a simple addon that shows a countdown from 5 once your mail is sent, so you know when you can continue to hammer that button.

Bulk Item Mailer (0.2 Beta)

Sniperumm — Wed, 01 Oct 2008 19:38:43 +0000

This add on is designed to save you time. It will add a new tab onto your mail window called 'Bulk'. In here you'll see the normal To, Subject, Message but also you'll see an area to dragged your items onto. Here you'll see the items as a list. You will then get a estimated time to send.

How To

1) Open mail window, select Bulk tab.
2) Fill in To, Subject and Body. Although you only really need To.
3) Drag items from your inventory onto the listbox (has a bar). (Will soon add a shortcut key so you can add without dragging)
4) Click Send.

To Remove an item from the list right click the item row. I will soon add an option to right click the locked item in the backpack to remove.

Features

Multi item attatchments - Can add as many items as you wish.
Resume mail - If you've closed the mail window or logged off you can resume by just opening the mail window again. If you move the item it will still be readded, but if you remove/restack the item it will not be added. Works for any number of alts you have!
Pause mail - Your in the middle of sending and you decide you want to pause, walk off and resend the rest later!
Postage Cost - Total postage cost for the bulk mail
Time Left - Time till next mail
Total Time Left - Displays the total time it will take to send the bulk
mail
Right Click Add/Remove - Right click the item in inventory to add and again to remove
Add/Remove while sending - You can add an item or remove it while the items are sending

Planned Features

Address Book
Auto name complete - While your typing it will display near matches to select
Many more...